 |
|
|
|
|
Product Details:
Payment & Shipping Terms:
|
| Insulator Name: | 10kV/12kV Composite Polymer Insulator | Application: | Overhead Transmission Lines And Substations |
|---|---|---|---|
| Color: | Grey Or Red | Package: | Paper Tubes Cartons Or Wooden Boxes |
| Products Standards: | IEC 61109/ANSI Standards | Insulator Model: | FXBW-10/70-WT-A To FXBW-10/70-PT-A |
| Insulator Material: | Composite/polymeric | Relevant Tests: | All Type Tested And Design Tested |
| High Light: | railroad insulators,train insulators |
||
10kv / 12kv Composite Polymer Insulators For Electrified Railway Power Lines
Specifications:
Dimensions and Characteristics of 10kV(12kV) composite polymer insulator
| Figure. No | Model | Rated Voltage | Specified Mechanical Load | Coupling Size | Section Length |
Insulating length |
Minimum Creepage | Full-Wave Impulse Withstand Voltage (Peak) |
1 Min Wet Power Frequency Withstand Voltage |
Weight (for Reference) |
|
kV |
kN |
H mm |
h mm |
L mm |
≥ kV |
≥ kV |
kg |
|||
| 1.15-1 | FXBW-10/70-WT-A | 10 | 70 | 16 | 340±5 | 163 | 400 | 95 | 60 | 1.5 |
| 1.15-2 | FXBW-10/70-DT-A | 10 | 70 | 16 | 343±5 | 163 | 400 | 95 | 60 | 1.3 |
| 1.15-3 | FXBW-10/70-WD | 10 | 70 | 16 | 322±5 | 159 | 415 | 95 | 60 | 1.3 |
| 1.15-4 | FXBW-10/70-DT-B | 10 | 70 | 16 | 312±5 | 159 | 415 | 95 | 60 | 1.1 |
| 1.15-5 | FXBW-10/70-WT-B | 10 | 70 | 16 | 319±5 | 159 | 415 | 95 | 60 | 1.2 |
| 1.15-6 | FXBW-10/70-UD-A | 10 | 70 | / | 318±5 | 159 | 415 | 95 | 60 | 1.2 |
| 1.15-7 | FXBW-10/70-UD-B | 10 | 70 | / | 360±5 | 158 | 600 | 95 | 60 | 1.4 |
| 1.15-8 | FXBW-10/70-UD-C | 10 | 70 | / | 365±5 | 163 | 400 | 95 | 60 | 1.4 |
| 1.15-9 | FXBW-10/70- WT -C | 10 | 70 | 16 | 296±5 | 163 | 460 | 95 | 60 | 1.4 |
| 1.15-10 | FXBW-10/70- TT -A | 10 | 70 | 16 | 296±5 | 163 | 460 | 95 | 60 | 1.4 |
| 1.15-11 | FXBW-10/70- PT -A | 10 | 20 | 16 | 375±5 | 163 | 400 | 95 | 60 | 1.3 |
Description:
1, 10kV(12kV) composite polymer insulator are widely used in overhead transmission lines and substations
2, Dead end fittings are up to the requirements from the clients, usually we use ball, socket, tongue, clevis for tension insulators with forged steel or cast steel. The dimensions and coupling size can be exactly according to the specification requirements from the utilities.
3, The silicon rubber color of the insulators are also up to the requirements from the clients and all the silicon rubber materials past 5000 hours aging test silicon content test and hydrophobicity test.
4, ECR core rods are used in all the insulators, so we can guarantee a very good mechanical strength and anti-acid pollution performance for the insulators.
5, All our insulators were type tested and design tested in accordance with IEC61109, maximum RIV is 100µV when tested at 1MHz and10% over nominal line ground voltage for indicated system voltage.
6, All the 10kV(12kV)tension suspension insulators are without corona ring
Applications:
1, 10kV(12kV) overhead transmission power lines.
2, 10kV(12kV) substations
3, 10kV(12kV)distribution lines
4, 10kV(12kV) electrified railways
Competitive Advantages:
