Product Details:
Payment & Shipping Terms:
|
Product Name: | 750kV Composite Polymer Insulator | Application: | 750kV Overhead Transmission Lines And Substations |
---|---|---|---|
Material: | Composite/polymer | Tests: | All Type Tested And Design Tested |
Design Standards: | IEC And ANSI | Type: | Tests |
Color: | Grey Or Red | Package: | Paper Tubes |
High Light: | silicone composite insulators,composite polymeric insulators |
Lightweight Composite Polymer Silicon Rubber Insulator 750kv ANSI Standard
Specifications:
Dimensions and Characteristics of 750kV Suspension tension Insulators
Figure. No | Model | Rated Voltage | Specified Mechanical Load | Coupling Size | Section Length | Insulating length | Minimum Creepage | Wet Switching Impulse Withstand Voltage (Peak) | 1 Min Wet Power Frequency Withstand Voltage | Weight (for Reference) |
kV |
kN | H mm | h mm | L mm | ≥ kV | ≥ kV |
kg | |||
1.3 | FXBW-750/100 | 750 | 100 | 16 | 7150±50 | 6750 | 23800 | 1800 | 1120 | 42.0 |
1.3 | FXBW-750/120 | 750 | 120 | 16 | 7150±50 | 6750 | 23800 | 1800 | 1120 | 42.0 |
1.3 | FXBW-750/160 | 750 | 160 | 20 | 7150±50 | 6680 | 23800 | 1800 | 1120 | 42.7 |
1.3 | FXBW-750/180 | 750 | 180 | 20 | 7150±50 | 6680 | 23800 | 1800 | 1120 | 42.7 |
1.3 | FXBW-750/210 | 750 | 210 | 20 | 7150±50 | 6680 | 23800 | 1800 | 1120 | 42.7 |
1.3 | FXBW-750/240 | 750 | 240 | 20 | 7150±50 | 6680 | 23800 | 1800 | 1120 | 42.7 |
1.3 | FXBW-750/300 | 750 | 300 | 24 | 7150±50 | 6600 | 23500 | 1800 | 1120 | 43.7 |
1.3 | FXBW-750/400 | 750 | 400 | 28 | 7150±50 | 6565 | 23500 | 1800 | 1120 | 56.7 |
Description:
1, 750kV suspension tension insulators are widely used in overhead transmission lines and substations
2, Dead end fittings are up to the requirements from the clients, usually we use ball, socket, tongue, clevis for suspension insulators with forged steel or cast steel. The dimensions and coupling size can be exactly according to the specification requirements from the utilities.
3, The silicon rubber color of the insulators are also up to the requirements from the clients and all the silicon rubber materials past 5000 hours aging test silicon content test and hydrophobicity test.
4, ECR core rods are used in all the insulators, so we can guarantee a very good mechanical strength and anti-acid pollution performance for the insulators.
5, All our insulators were type tested and design tested in accordance with IEC61109, maximum RIV is 100µV when tested at 1MHz and10% over nominal line ground voltage for indicated system voltage.
6, All the 750kV suspension or tension insulators are designed with two corona rings
Applications:
1, 750kV EHV overhead transmission power lines.
2, 750kV EHV substations
Competitive Advantages: