 |
|
|
|
|
Product Details:
Payment & Shipping Terms:
|
| Products Name: | 36kV Polymer Pin Insulator | Application: | 36kV Overhead Distribution Lines |
|---|---|---|---|
| Insulator Color: | Any Color Required By The Clients | Packed In: | Paper Tubes Cartons Or Wooden Boxes |
| Standards: | IEC 61952/ANSI | Type Of The Insulators: | FPW-36/4 To FPW-36/8 |
| Material: | Composite Or Polymer | Conducted Tests: | All Were Design Tested And Type Tested |
| High Light: | pin type insulator,pin post insulator |
||
High Voltage Pin Post Insulator Silicone Rubber 36 Kv Impact Resistant
Specifications:
Dimensions and specifications of 36kVpolymer pin insulators
| Figure. No | Model | Rated Voltage | Specified Cantilever Load | Section Length |
Insulating length |
Shed diameters |
Minimum Creepage | Bottom Screw |
Full-Wave Impulse Withstand Voltage (Peak) |
1 Min Wet Power Frequency Withstand Voltage | Weight |
|
kV |
kN |
H mm |
h mm |
D/d mm |
L mm |
≥ kV |
≥ kV |
kg |
|||
| 4.1-1 | FPW-36/8 | 36 | 8 | 610±15 | 465 | 157/105 | 1400 |
M20/M22 /M24 |
230 | 95 | 7.1 |
| 4.1-2 | FPW-36/4 | 36 | 4 | 610±15 | 465 | 146/94 | 1400 |
M18/M20/ M22 |
230 | 95 | 4.9 |
Description:
1, 36kVpolymer pin insulators are widely used in 36kV distribution lines.
2, Dead end fittings are up to the requirements from the clients, usually we use different pins according to the specific requirements from different clients. The dimensions and coupling size can be exactly according to the specification requirements from the utilities.
3, The silicon rubber color of the insulators are also up to the requirements from the clients and all the silicon rubber materials past 5000 hours aging test silicon content test and hydrophobicity test.
4, ECR core rods are used in all the insulators, so we can guarantee a very good mechanical strength and anti-acid pollution performance for the insulators.
5, All our insulators were type tested and design tested in accordance with IEC61952, maximum RIV is 100µV when tested at 1MHz and10% over nominal line ground voltage for indicated system voltage.
Applications:
1, All the 36kV distribution lines
Features/ advantages :
1. Good performance of hydrophobility
2. Anti-pollution
3. High mechanical strength
4. Small volume
5. Light weight
6. Can replace the porcelain ones because of the good anti pollution, convenient installation and free from maintainance performance.
Our services
1. We offer the best solution and products to fulfill the buyers' requirements.
2. We can arrange technicians to install the equipments and train your staff on site.
3. Anytime, we provide considerate technical consultation.
4. Prompt reply for your inquiry and feedback.
5, OEM service is also available with us.
