 |
|
|
|
|
Product Details:
Payment & Shipping Terms:
|
| Product Name: | 33kV Composite Polymer Insulator | To Be Used In: | Overhead Transmission Lines And Substations |
|---|---|---|---|
| Insulator Color: | Grey Or Red | Usually Packed In: | Paper Tubes Cartons Or Wooden Boxes |
| Products Standards: | IEC 61109/ANSI | Insulator Model: | FXBW-35/70-650-A To FXBW-35/100-650-B |
| Insulator Material: | Composite/polymer | Relevant Tests: | All Type Tested And Design Tested According IEC 61109 |
| High Light: | silicone rubber insulator,composite polymeric insulators |
||
Composite Polymeric Transmission Tower Insulators Safety High Flexibility
Specifications:
Dimensions and Characteristics of 33kV composite polymer insulator
| Figure. No | Model | Rated Voltage | Specified Mechanical Load | Coupling Size | Section Length |
Insulating length |
Minimum Creepage | Full-Wave Impulse Withstand Voltage (Peak) |
1 Min Wet Power Frequency Withstand Voltage |
Weight (for Reference) |
|
kV |
kN |
H mm |
h mm |
L mm |
≥ kV |
≥ kV |
kg |
|||
| 1.12-1 | FXBW-33/70-650-A | 33 | 70 | 16 | 650±15 | 473 | 1050 | 230 | 95 | 2.5 |
| 1.12-1 | FXBW-33/100-650-A | 33 | 100 | 16 | 650±15 | 450 | 1050 | 230 | 95 | 2.5 |
| 1.12-1 | FXBW-33/70-650-B | 33 | 70 | 16 | 650±15 | 473 | 1450 | 230 | 95 | 3.1 |
| 1.12-1 | FXBW-33/100-650-B | 33 | 100 | 16 | 650±15 | 450 | 1450 | 230 | 95 | 3.1 |
| 1.12-2 | FXBW-33/70-420 | 33 | 70 | 16 | 420 | 318 | 880 | 200 | 90 | 2.0 |
Description:
1, 33kV composite polymer insulators are widely used in overhead transmission lines and substations
2, Dead end fittings are up to the requirements from the clients, usually we use ball, socket, tongue, clevis for tension insulators with forged steel or cast steel. The dimensions and coupling size can be exactly according to the specification requirements from the utilities.
3, The silicon rubber color of the insulators are also up to the requirements from the clients and all the silicon rubber materials past 5000 hours aging test silicon content test and hydrophobicity test.
4, ECR core rods are used in all the insulators, so we can guarantee a very good mechanical strength and anti-acid pollution performance for the insulators.
5, All our insulators were type tested and design tested in accordance with IEC61109, maximum RIV is 100µV when tested at 1MHz and10% over nominal line ground voltage for indicated system voltage.
6, All the 33kV tension suspension insulators are without corona ring
Applications:
1, 33kV overhead transmission power lines.
2, 33kV substations
3, 33kV distribution lines
Competitive Advantage:
1, Very good anti-pollution performance, no need to wash the insulators after the installation in lines.
2, Very convenient installation because of its light weight and one whole piece compared with glass insulators and ceramic insulators.
3, Excellent hydrophobicity characteristics can help to void flashover and guarantee the insulators with very good electric performance.
